Maker Monday: Muscle Rub + Make Your Own Muscle Balm at Home

Ever since we've developed a natural muscle rub to help soothe sore muscles, it's been a super HOT seller! Here is a little sneak peak into how we make this product.

We make our balm base which is a blend of organic sunflower oil, cocoa butter and candelilla wax (which we use to keep this product vegan!)

Menthol is one of the main ingredients in this product, giving it that cooling, soothing feeling. We also use this as our main ingredients in our Crack Stick lip balms!

Here is another important ingredient in this product: capsicum oleoresin. Capsaicin is the active ingredient in chili peppers which makes them hot. It is used topically to relieve muscle or joint pain because it causes a sensation of heat that activates certain nerve cells. You can see in the picture below how concentrated it is! It is a deep, rich reddish orange color and gives the final product a lovely color.

And here we have the finished product! It's a nice bright color now but will mellow out to a light pink/red as it cools and solidifies in the tin.

You can purchase our Muscle Rub here, or you can keep reading and make your own muscle balm at home!While our muscle rub has all the bells and whistles because we jam packed it with muscle soothing ingredients, our guide to at-home muscle balm will give you a good starting point to make your own if you are looking for a DIY project.

Lee's Guide to At-Home Muscle Balm

This recipe is going to be in a coconut oil base. If you keep the product in the fridge, you won't need any other thickeners because coconut oil solidifies at 76 degrees. You can choose to add cocoa butter, shea butter or beeswax to give it a thicker texture. We'll also be giving you some other suggestions for ingredients to add. You should add whatever you like and have available in your area! This isn't going to be a straight forward recipe - this is a guideline meant to be altered and explored to your liking.

Here is a list of some ingredients you can use and equipment you may need:

• Base oils - coconut oil, shea butter, cocoa butter
• Essential oils - peppermint, eucalyptus, clove, cinnamon, Thieves
• Muscle aid - cayenne powder, ginger root powder
• Texture enhancer - cornstarch, arrowroot powder 
• Pyrex, double boiler, mixing bowl, hand blender
• Measuring cups, measuring spoons
• Cheesecloth
• Storage jar - small jam jar, mason jar or baby food jar

1. Start with about 1/4 cup of coconut oil. If you want a thicker product, you can add about 1 teaspoon of beeswax or candelilla wax OR 1-2 tablespoons of cocoa butter OR 2-4 tablespoons of shea butter. You can play around with these numbers and even combine different thickeners to get a product you love!  Heat your oil(s) in a Pyrex in 30 second bursts in the microwave. Stir between intervals until melted. You can use a double boiler if you prefer.
2. Now we want to infuse your hot oil base with cayenne and/or ginger. Add 1 tablespoon of cayenne powder. If you want, you can additionally add 1-2 teaspoons of ground ginger root.
3. Let the cayenne (and ginger if you've added it) infuse into the warm oil(s) for 1-2 hours. When the oils start to cool, gently reheat them to keep the mixture warm.  
4. After your infusing time, give the oils a final heating. Pour your melted infused oil(s) through a few layers of cheesecloth into a mixing bowl.
5. Now it's time to add your essential oils! Use any combination of the oils we've mentioned, or if you are knowledgeable in essential oil usage, choose your own! We suggest anywhere from 10-40 drops of essential oils depending on how strong you want your product to be. Add your essential oils and give the oils a mix.
6. Optional: you can add 1-2 teaspoons of cornstarch or arrowroot powder to help reduce the oily feel of the final product.
7. Now you should have a mixing bowl that contains infused coconut oil + any thickening oil(s) you have decided to use + essential oil(s) + cornstarch or arrowroot powder if you have decided to add it. At this point you can give it all a good mix and put it in a jar for storage.
8. Optional: If you want a to give the product a little oomph, now it's time to turn it into a whipped muscle rub! When all the ingredients have cooled and thickened, whip the whole batch with a hand blender for 5-8 minutes until soft and creamy. Scoop the resulting product into your storage jar and enjoy!

If you've tried our Muscle Rub before, let us know in the comments how you like it!

Did you try your own DIY at home muscle balm, let use know in the comments how it turned out!

Feature Friday: Hemp Seed Oil

We love using hemp seed oil for a variety of purposes at the shop! Properly cold pressed hemp seed oil does NOT contain THC but DOES contain omega-3 and omega-6 fatty acids.

The fatty acid content in hemp seed oil makes it great for moisturizing the skin and hair. We also use it as a superfat oil in some of our bar soaps including Nag Champa, Hinoki Wood and The Hippie Bar.

How do you like to use hemp seed oil?

Maker Monday: Foaming Bath Frosting + Recipe + Give Away

Foaming Bath Frosting is a creamy, yummy smelling type of body wash that has a neat texture and gives you lots of bubbles! We wanted to create a product that was fun to make and easy to customize. As you can see in the pictures above, this product creates some nice bubbles and really creates a fluffy lather when used with a bath puff! Here's a look into how easy it is to create this product.

We started by scooping the base into our mixing bowl.

To the bath frosting base we add our fragrance oil. This particular batch uses a sweet floral scent we use for special projects around the shop!

I wanted to add a little bit of color to this batch. We're going for a nice light pink.

The pink is a little dark after a few seconds of blending, but after this product is done being whipped to a fluffy texture, the color will significantly lighten!

Here is the foaming bath frosting after all the scent and color is whipped in.

Look at that lovely texture! It's so light and fluffy and smells amazing.

Lee's Simple Steps for DIY Bath Frosting

Ready to make your own bath frosting? We're going to link you to Wholesale Supplies Plus for a one stop shop to get everything you'll need. Here's what you need to make one pound of bath frosting:

• Foaming Bath Whip base from Wholesale Supplies Plus
• fragrance oil or essential oil of choice
• pipettes
• kitchen scale
• mixing bowl
• spatula or spoon
• hand blender
• storage containers
• optional add-ins: 
• moisturizing oil like almond oil, coconut oil, shea butter, etc.
• color; a few drops of food coloring or a pre-mixed color from WSP

1. scoop out 16 ounces of room temperature Foaming Bath Whip base into your mixing bowl (unless you've purchased the 1lb single jar, then use the whole thing!)
2. add up to 16 mL of your fragrance or essential oil of choice, more or less based on preference
3. add 1-4 drops of color if you would like
4. if you will be using a moisturizing oil, add 1-3 teaspoons. Melt the oil if you are using one that is solid at room temperature
5. Start mixing! Use the mixing attachements in the off position to mix everything around a bit so you don't splash ingredients out of the bowl. Then start whipping everything on medium to high for 3-8 minutes until it's all blended! Half way through mixing, use a spatula or spoon to scrape the sides of your bowl.
6. Package your final product. We suggest a plastic jar to avoid slipping and breaking in the shower. You can use jars from WSP, a plastic tub you have at home or even a zip lock bag with the end clipped like a piping bag.

There are additional instructions and recipes at Wholesale Supplies Plus for using the Foaming Bath Whip.

Wholesale Supplies Plus is a great place to order ingredients for small projects like this. They offer small quantities of ingredients and free shipping on orders over $40. Usually they are a one-stop-shop for weekend projects!
 

We'll be sending samples of our Foaming Bath Frosting with online orders over $25 starting March 14th, 2016 until we run out. Click here to get some awesome Halo products and your sample of Foaming Bath Frosting.

Did you receive a sample of the Foaming Bath Frosting from Halo Soap? Let us know how you liked it in the comments!

Feature Friday: Honey + Bonus Recipe

Honey is a delicious natural sweetener and we love using it for it's moisturizing properties in skin care products!

A customer favorite that uses honey in the recipe is our Honey Bee Lip Balm. It's a creamy, emollient lip balm that takes advantage of the sweetness of the honey to give the lip balm a nice "flavor". Formulating a lip balm with honey is a little tricky (honey doesn't like to dissolve in oil!) but we've done a pretty good job at working out all the kinks and making this a great treat for your lips!

Honey Face Mask Recipes
There are TONS of different ways to combine honey with a few other ingredients you may have in your kitchen to create a lovely face mask. Here are some of our favorites:

Honey Mask for Acne Skin
1 tablespoon of honey
1/2 teaspoon cinnamon
half a lemon
mix the honey, cinnamon and juice from the lemon half in a small bowl. Apply the mixture to clean face and neck. Let it sit there about 10 minutes or so. Rinse.

Honey Mask Dry Skin
1 tablespoon honey
1 tablespoon avocado
1 tablespoon plain yogurt
1 egg yolk
Mix the ingredients together and apply to face and neck. Leave on for up to 30 minutes. Rinse.

Of course, we also like to use honey has a sweetener in our favorite lemon water recipe. We've posted this one before but it's too delicious not to share again!

Lee's Lemon Water

• 2 cups of hot water
• 1-2 tablespoon of honey
• 1 large lemon
• 2 pint glasses 
• ice
• strainer

1. Fill a Pyrex with 2 cups of hot water. Not boiling! The goal is to have the water warm enough to dissolve the honey. Add your honey to the hot water and mix, mix, mix until it's all dissolved!
2. Take your lemon and roll it across the counter a few times to help release the juices. Cut the lemon in half. Over a strainer, squeeze one lemon half into each pint glass. Make sure you get all that good lemon juice out!
3. Fill each pint glass to the top with lots of ice.
4. Now add 1 cup of your warm (NOT HOT! Hot water could fracture your pint glasses.) to each pint glass.
5. Mix and enjoy!

Do you have a favorite way to use honey? Let us know in the comments!

Tea To Your Health!

At the shop, we go crazy for our daily dose of tea. We use a variety of teas from Rishi Tea to create some of our products like our popular Chai Tea bar soap and Green Tea Antioxidant Body Scrub along with other tea themed products. 

You can't have just one cup of tea. I can't, anyways! What do I like to use to make a larger amount of loose leaf tea? Well, when I'm at home I don't mine using my various tea tools - my Tea-Rex loose leaf infuser, my cast iron tea pot - but when I'm at the shop I don't have time to mess around with my daily tea ritual. I use a coffee maker!

I know certain teas should be brewed at specific temperatures and steeped for various amounts of time, but so far every tea I have tested has been quite tasty!

Here's my basic cup of tea:

• 32 ounces or 4 cups of water + 4 tablespoon of tea (my favorite is Organic White Rose Melange)
• Run the coffee pot
• For sweetened tea, I add 1 teaspoon local honey to a mug and top it off with the freshly brewed tea
• For an added boost, I add a drop or two of one of my favorite EO "drink" blends!

IMPORTANT NOTE: There are lots of articles online listing the pros and cons of using essential oils in water for ingesting. There are a lot more articles from some of the leaders in essential oil education. The general consensus among these professions is that essential oils in water is not a good form of consumption, specifically because oil does not dissolve in water. That being said, I do it anyway. I do it very seldom. And I do it when it's for a purpose.

What are some of your favorite types of tea to drink?